Easyget LED Arcade DIY Parts 2x Zero Delay USB Encoder + 2x 8 Way Joystick + 20x LED Illuminated Push Buttons for Mame Jamma Arcade Project Red + Blue Kits

Easyget LED Arcade DIY Parts 2x Zero Delay USB Encoder + 2x 8 Way Joystick + 20x LED Illuminated Push Buttons for Mame Jamma Arcade Project Red + Blue Kits

This is a 2 Player Arcade Game DIY Parts for PC / PS3 USB Controller DIY Projects.

The kit can perfect fit for all the Windows System & Raspberry Pi with RetroPie System.

Each Encoder have its own USB Cable to make sure that Multiplayer can play the games in the same condition!

The Joystick is a 4/8 way professional joystick!

The buttons are 5V LED Illuminated push buttons with build-in Microswitches inside.

We will pack a installation inside the package.Please connect the parts to the encoder board exactly as our installation shows to you.

And please attention to the logo inside the led Buttons. You should connect the 3pin wires to the LED buttons exactly the same as our installation shows to you.

Please plug both USB Cables to the Device before you configurate the control.

If you purchase one of this item,What will included in the package?

2x Zero Delay LED USB Encoder
2x USB Cable
2x 5Pin wires for Joystick
20x 3Pin wires for LED Push Buttons
2x Red 24mm Ring-Fixing LED Push Buttons as start buttons
2x Blue 24mm Ring-Fixing LED Push Buttons as start buttons
8x Red 30mm Ring-Fixing LED Push Buttons as fight buttons
8x Blue 30mm Ring-Fixing LED Push Buttons as fight buttons
1x Red 5Pin 4/8 way joystick
1x Blue 5Pin 4/8 way joystick
1x Install Description

More Detail Information...

Tag : easyget, arcade, parts, zero, delay, encoder, joystick, illuminated, push, buttons, mame, jamma, project, blue, kits
Easyget 4 Pcs/Lot 5V LED Illuminated Push Button 1P / 2P Player Start Buttons / 2x Coin Buttons for MAME / JAMMA / Fighting Games / Arcade Video Games

Easyget 4 Pcs/Lot 5V LED Illuminated Push Button 1P / 2P Player Start Buttons / 2x Coin Buttons for MAME / JAMMA / Fighting Games / Arcade Video Games

Easyget 5V Luxury LED Illuminated Start Player Button Bundle 1P / 2P Start Player Buttons & 2x Coin LED Illuminated Button for MAME Cabinet / JAMMA / Arcade Game Machines

The button is a most high quality arcade buttons.It can used for more than 1,000,000 cycle times.You can use them to your DIY project and you can also use it to replace your button in the machine.

Each button will come with the microswitch.You can use it directly when you get the item.

 Compatible model:                 

Raspberry Pi Retropie Arcade DIY Projects ,Raspberry Pi 2 Retropie Arcade DIY Projects ,MAME DIY Projects ,USB MAME Cabinet Arcade DIY Projects ,Video Games Projects & Fight Stick etc.              

Condition:BRAND NEW

Voltage: 5V

WARNING: Do not use more than 5V to Prevent Burn-out!            

What's in side the Package?  

1 x "1P" LED Player Push button with LED Lamp & Microswitch

1 x "2P" LED Player Push button with LED Lamp & Microswitch

2 x "COIN" LED Push button with LED Lamp & Microswitch

4 x Adapter Ring

More Detail Information...

Tag : easyget, illuminated, push, button, player, start, buttons, coin, mame, jamma, fighting, games, arcade, video
Gamelec 2-Player Arcade Buttons and Joystick DIY Controller Kit for Windows and Raspberry Pi,x 5 Pin Joysticks,Red and Blue Each with 10 Buttons

Gamelec 2-Player Arcade Buttons and Joystick DIY Controller Kit for Windows and Raspberry Pi,x 5 Pin Joysticks,Red and Blue Each with 10 Buttons

Description:
Gamelec Arcade Game kits come with 2 sets of joystick kit,you can play the game with your friends together. Fully enjoy the fun!
Support Windows systems and Raspberry Pi, such as Windows XP, Win7, Win8 and RetroPie etc. It's a perfect kit for Arcade PC Game DIY Project.

Note:More details to build the project for Raspberry Pi,please feel free to contact us to get the instructions.

Package Includes:
2 x Encoder Board
2 x USB Cable
2 x 5pin Cable for Joystick
8 x 30mm Blue Buttons
2 x 24mm Blue Buttons
8 x 30mm Red Buttons
2 x 24mm Red Buttons 2 x Joystick (1pcs Red, 1pcs Red)
20x Cables for Buttons

Note:
The joystick is 8 way in default, if you want to change it to 4 way, please download the instructions refer to the instructions card or contact the seller for instructions. Free to contact us if any questions.

More Detail Information...

Tag : gamelec, player, arcade, buttons, joystick, controller, windows, raspberry, joysticks, blue, each, with
EG STARTS Classic Arcade Game DIY Part for Mame USB Cabinet 2X Zero Delay USB Encoder to PC Games + 2X 8 Way Joystick + 18x Arcade Push Button (Including 1p / 2p Start Buttons) Multiple Colour Kits

EG STARTS Classic Arcade Game DIY Part for Mame USB Cabinet 2X Zero Delay USB Encoder to PC Games + 2X 8 Way Joystick + 18x Arcade Push Button (Including 1p / 2p Start Buttons) Multiple Colour Kits

EG Starts Classic Arcade Game DIY Parts for Mame USB Cabinet 2x Zero Delay USB Encoder to PC Games + 2x 8 Way Classic Arcade Joystick + 18x Standard Arcade Push Button (Including 1p / 2p Start Buttons) Multiple Colour Kits

This list is for 2 Player Arcade DIY Parts Kit For Arcade MAME JAMMA & Arcade Fight Games project.
The Kits Including the 2 x Zero Delay USB Encoder,2 x HAPP Style Joystick,16 x HAPP Style Arcade Button & 1P/2P Start Push Button.
The encoder can work perfect on Windows system without any drivers.It is 100% Zero Delay.You can use them to DIY your own arcade machines. Each Encoder have its own USB Cable so that will not have any effective to another player.So If you need build Multiplayer Arcade Machine. Just need add the quantity for the item.^ ^

We will send the install description with the item.So please don't worry for the DIY.It will be easy and funny!

The Zero delay is the most cost effective encoder option available. Simply connect your arcade controls to it with the included wires, plug the encoder into your computer , and enjoy arcade controls for gaming such as MAME, PC gaming and console emulation. Also a great encoder for making a fight stick.

Compatible model:
MAME , JAMMA & Fight Stick etc.

Packing Includes
2 x Zero Delay Keyboard Encoder
2 x USB Cable
8 x 2pin Cable for Joystick
20 x 2Pin Wire cables for Buttons
2 x 4/8 Way Happ Style Joystick with bat top ball handle (Big Size)
16 x Happ Style Push Button
18 x Microswitch for the Push Button
1 x 1P Start Push Button
1 x 2P Start Push Button
1 x Install Description

More Detail Information...

Tag : starts, classic, arcade, game, part, mame, cabinet, zero, delay, encoder, games, joystick, push, button, including, start, buttons, multiple, colour, kits
Arcade Buttons EG STARTS 1 Player DIY Kit Joystick 5V LED Arcade Button for Arcade Stick PC Games Mame Raspberry pi

Arcade Buttons EG STARTS 1 Player DIY Kit Joystick 5V LED Arcade Button for Arcade Stick PC Games Mame Raspberry pi

This is a LED Arcade Game DIY Parts.

The encoder support all the windows systems!

Each Encoder have its own USB Cable to make sure that Multiplayer can play the games in the same condition!

The Joystick is a 8 way professional joystick!

The buttons are 5V LED Illuminated push buttons with build-in Microswitches inside.

The button default designed as when you push the button it will lighted.

If you need the buttons lighted all the times,Just contact us.We will help you set it as lighted all the time.

What will included in the package?
1x Zero Delay LED USB Encoder
1x USB Cable
1x 5Pin wires for Joystick
10x 3Pin wires for LED Push Buttons
2x 24mm White LED Push Buttons
8x 30mm LED Push Buttons( 2xRed, 2xYellow, 2xBlue, 2xGreen)
1x Red 5Pin 8 way joystick
1x Installation Notes.

Installation Video:
https://www.youtube.com/watch?v=Me51lUO8Ess

Need more products. Please visit the store:
https://www.amazon.com/s?marketplaceID=ATVPDKIKX0DER&me=A3H7VB6FZ4M9FM&merchant=A3H7VB6FZ4M9FM&redirect=true

More Detail Information...

Tag : arcade, buttons, starts, player, joystick, button, stick, games, mame, raspberry
EG STARTS 10x 12V LED lit Arcade Push Buttons Micro Switch Jamma Mame Games Parts Multicade Choice 5 Colour

EG STARTS 10x 12V LED lit Arcade Push Buttons Micro Switch Jamma Mame Games Parts Multicade Choice 5 Colour

This listing is for 10 x New full color Illuminated Arcade Button With 12V LED

Give your arcade project the wow factor with this translucent, illuminated arcade button. Each button comes complete with a fixing ring, bulb holder, spacer, microswitch and 5V LED. If you decide to illuminate the LED supplied with this arcade button, you will need a 12V power supply. This can be taken from a spare molex connector (yellow wire) on a PC power supply or a Jamma PSU. This button will mount in a 24mm to 28mm hole.

What's included with this button?
10 x LED Illuminated Push Button
10 x Fixing ring
10 x 12V LED Lamp (We will add two lamp as a gift)
10 x Bulb holder
10 x Microswitch (We will add one Microswitch as a gift)

Product Dimensions:
* Mounting hole required: 24mm - 28mm
* Overall diameter of button across plunger: 32mm
* Maximum depth of button from top of plunger to bottom of microswitch: 65mm

Wiring Information:
These buttons require 4.8mm crimped wires for connection.
1 wire for ground connection (CO) and 1 wire for signal connection (NO).
These buttons require 6.3mm crimped wires for illuminating.
1 wire for the positive connection and 1 wire for the negative connection (if the LED does not work. Please exchange LED lights interface. )

We will send Each color of 2 pices to you!
Need more products. Please visit the store:
https://www.amazon.com/s?marketplaceID=ATVPDKIKX0DER&me=A3H7VB6FZ4M9FM&merchant=A3H7VB6FZ4M9FM&redirect=true

More Detail Information...

Tag : starts, arcade, push, buttons, micro, switch, jamma, mame, games, parts, multicade, choice, colour
EG Starts 4 Player Classic DIY Arcade Joystick Kit Parts USB Encoder To PC Controls Games + 4/8 Way Stick + 5V led Illuminated Push Buttons Compatible Video Game Consoles Mame Raspberry Pi & 4 Colors

EG Starts 4 Player Classic DIY Arcade Joystick Kit Parts USB Encoder To PC Controls Games + 4/8 Way Stick + 5V led Illuminated Push Buttons Compatible Video Game Consoles Mame Raspberry Pi & 4 Colors

This is a LED Arcade Game DIY Parts for 4 Player DIY Project.

The encoder support all the windows systems!

Each Encoder have its own USB Cable to make sure that Multiplayer can play the games in the same condition!

The Joystick is a 8 way professional joystick!

The buttons are 5V LED Illuminated push buttons with build-in Microswitches inside.

The buttons default as lighted all the time.

Joystick and small button hole diameter: 24mm

Large button hole diameter: 28-30mm

If you purchase one of this item,What will included in the package

4x Zero Delay LED USB Encoder
4x USB Cable
4x 5Pin wires for Joystick
40x 3Pin wires for LED Push Buttons
32x Larger 5V LED Push Buttons (8x Red, 8x Yellow, 8x BLUE 8x GREEN)
8x Small 5V LED Push Buttons (2x Red, 2x Yellow, 2x Blue, 2x Green)
4x 5Pin 8 way joystick (1x Red, 1x Yellow, 1x Blue, 1x Green,)
1x Instructions

Installation Video:
https://www.youtube.com/watch?v=Me51lUO8Ess

Need more products. Please visit the store:
https://www.amazon.com/s?marketplaceID=ATVPDKIKX0DER&me=A3H7VB6FZ4M9FM&merchant=A3H7VB6FZ4M9FM&redirect=true

More Detail Information...

Tag : starts, player, classic, arcade, joystick, parts, encoder, controls, games, stick, illuminated, push, buttons, compatible, video, game, consoles, mame, raspberry, colors
Dashtop LED Arcade DIY Parts 2x Zero Delay USB Encoder + 2x 2/4/8 Way LED Joystick + 20x LED Illuminated Push Buttons for Mame Windows System & Raspberry Pi Projece Arcade Project Red + Blue Kits

Dashtop LED Arcade DIY Parts 2x Zero Delay USB Encoder + 2x 2/4/8 Way LED Joystick + 20x LED Illuminated Push Buttons for Mame Windows System & Raspberry Pi Projece Arcade Project Red + Blue Kits

Dashtop LED Arcade DIY Parts 2x Zero Delay USB Encoder + 2x 2/4/8 Way LED Joystick + 20x LED Illuminated Push Buttons for Mame Windows System & Raspberry Pi Projece Arcade Project Red + Blue Kits

Attention Buyer:

The 60 kits of stocks recently sent to the Amazon warehouse have different positive and negative poles for the LED due to encoder board upgrades.

If you got a kit that joystick led can't be powered.You may need to change the positive and negative poles of the LED power harness. Here is the steps:

1: Remove the wires out from 2Pin connector (Only one side not both side).

2: Exchange these two wire's position and install them back to the 2Pin Connector.

We have already realized this problem and have already fixed this issue.

Please contact us if you encounter any problems.

This is a LED Arcade Game DIY Parts for 2 Player DIY Project.

The encoder support all the windows systems!

Each Encoder have its own USB Cable to make sure that Multiplayer can play the games in the same condition!

The Joystick is a 2/4/8 way professional LED joystick!

The buttons are 5V LED Illuminated push buttons with build-in Microswitches inside.

The color of the control board may vary depending on the production lot.

What's inside the package?

2x Zero Delay LED USB Encoder
2x USB Cable
2x 5Pin wires for Joystick
20x 3Pin wires for LED Push Buttons
2 x 2Pin Wire provide 5V voltage for the LED Joystick
4x 24mm Ring-Fixing LED Push Buttons as start buttons
16x 30mm Ring-Fixing LED Push Buttons as fight buttons
2x 5Pin 2/4/8 way joystick
1x Install Description

More Detail Information...

Tag : dashtop, arcade, parts, zero, delay, encoder, joystick, illuminated, push, buttons, mame, windows, system, raspberry, projece, project, blue, kits
EG Starts 2 Player Classic Arcade Contest DIY Kits USB Encoder To PC Joystick + 8 Ways Sticker + Chrome Plating LED Illuminated Push Button 1 & 2 Player Coin Buttons For Arcade Mame Raspberry Pi Games

EG Starts 2 Player Classic Arcade Contest DIY Kits USB Encoder To PC Joystick + 8 Ways Sticker + Chrome Plating LED Illuminated Push Button 1 & 2 Player Coin Buttons For Arcade Mame Raspberry Pi Games

This is a LED Arcade Game DIY Parts for 2 Player DIY Project.

The encoder support all the windows systems!

All the buttons are not metal.

If the LED does not light. Then please exchange the location LED interface.

Each Encoder have its own USB Cable to make sure that Multiplayer can play the games in the same condition!

The Joystick is a 8 way professional joystick!

The buttons are 5V LED Illuminated push buttons with build-in Microswitches inside.

The buttons default as lighted all the time.

If you purchase one of this item,What will included in the package

2x Zero Delay LED USB Encoder
2x USB Cable
2x 5Pin wires for Joystick
19x 3Pin wires for LED Push Buttons
1x Red 5Pin 8 way joystick
1x Blue 5Pin 8 way joystick
1x 1 Player Larger 5V LED Chrome Push Buttons(White)With LED Lamp and Micro Switch
1x 2 Player Larger 5V LED Chrome Push Buttons(White)With LED Lamp and Micro Switch
2x Coin Larger 5V LED Chrome Push Buttons (White)With LED Lamp and Micro Switch
16x Larger 5V LED Chrome Push Buttons With LED and Micro Switch(4xRED 4xYELLOW 4xBLUE 4xGREEN)
1x Instructions

Need more products. Please visit the store:
https://www.amazon.com/s?marketplaceID=ATVPDKIKX0DER&me=A3H7VB6FZ4M9FM&merchant=A3H7VB6FZ4M9FM&redirect=true

More Detail Information...

Tag : starts, player, classic, arcade, contest, kits, encoder, joystick, ways, sticker, chrome, plating, illuminated, push, button, coin, buttons, mame, raspberry, games
Jiu Man EG Starts 10 Pcs/Lots Chrome Plating 30mm LED Illuminated Push Buttons with Micro Switch for Arcade Machine Games Mame Jamma Parts 12V Each Color of 2 Pieces

Jiu Man EG Starts 10 Pcs/Lots Chrome Plating 30mm LED Illuminated Push Buttons with Micro Switch for Arcade Machine Games Mame Jamma Parts 12V Each Color of 2 Pieces

This listing is for 10 x New Chrome Illuminated Arcade Button With 12V LED

All the buttons are not metal.

If the LED does not light. Then please exchange the location LED interface.

Give your arcade project the wow factor with this translucent, illuminated arcade button. Each button comes complete with a fixing ring, bulb holder, spacer, microswitch and 12V LED. If you decide to illuminate the LED supplied with this arcade button, you will need a 5V power supply. This can be taken from a spare molex connector (yellow wire) on a PC power supply or a Jamma PSU. This button will mount in a 24mm to 28mm hole.

What's included with this button?
10 x LED Illuminated Push Button
10 x Fixing ring
10 x 12V LED Lamp (We will add two lamp as a gift)
10 x Bulb holder
10 x Microswitch (We will add one Microswitch as a gift)

Product Dimensions:
* Mounting hole required: 24mm - 28mm
* Overall diameter of button across plunger: 32mm
* Maximum depth of button from top of plunger to bottom of microswitch: 65mm

Wiring Information:
These buttons require 4.8mm crimped wires for connection.
1 wire for ground connection (CO) and 1 wire for signal connection (NO).
These buttons require 6.3mm crimped wires for illuminating.
1 wire for the positive connection and 1 wire for the negative connection

Need more products. Please visit the store:
https://www.amazon.com/s?marketplaceID=ATVPDKIKX0DER&me=A3H7VB6FZ4M9FM&merchant=A3H7VB6FZ4M9FM&redirect=true

More Detail Information...

Tag : starts, lots, chrome, plating, 30mm, illuminated, push, buttons, with, micro, switch, arcade, machine, games, mame, jamma, parts, each, color, pieces