The Wixey WR25 Mini Digital Height Gauge is a Light Weight, Easy to Use Gauge for all Types of Wood Working Applications. Use this Gauge for Setting Saw Blade and Router Bit Heights as Well as Positioning Fences on Router Tables and Band Saws. The Large Easy to Read Display Reads in Inches with Fractions or Millimeters. The Fractions are Displayed Using Precise Fraction Technology which Gives you 4 Times The Accuracy of Other Fraction Readouts. The Decimal Inches are Displayed in .002-Inch Increments and The Millimeters in .1mm Increments. The Accuracy and Repeatability Are .004-Inch (.1mm)
iGaging Snap Check Height Gauge for Woodworking Jointer/Router/Planar Blade
Use Snap Check to set jointer knives, jointer table parallelism and precise depth of cut. Set table saw blade and dado stacks for depth of cut. Snap Check is the perfect tool for setting router bits to either a router base or router table. You will find lots more uses in your shop.
Let Snap Check make your machine and tool setups a SNAP!
- Smooth Spring Plunger Movement
- Flat and Ball Tip Anvils Included
- Super Strong Rare Earth Magnetic Base
- Humidity & Dust Resistant. Auto shut off.
- Display Inch/mm/Fractions.
- Accuracy 0.001"/1".
- Range: 1/4" depth to 2" height
- Spare battery included
Accutrate to 0.0005-Inch
This Capri Tools mini digital height gauge is capable of precise height and depth measurements. The large display reads in decimal inches, fractional inches, or millimeters. The self-standing gauge has magnetic feet to enable setting cutter depth on router tables and has a low profile for back fence adjustments. For total accuracy, switch between ABS (preset) and INC (zeroset) measurement modes.
This gauge is a highly accurate measuring device developed specifically for woodworking. It can be used to set saw blade and router bit height as well as set the distance from a router fence to the bit. They are constructed of high quality anodized aluminum along with hardened and ground stainless steel components. They include the same advanced Wixey Technology features found in all our other Digital Readout products. The magnetic base allows easy positioning for measurements on cast iron table tops and the stainless steel hardened and ground anvil insures long term measuring accuracy.•Dimensions: Measures 12" wide by 8.2" long by 1.5" tall; 13.6 ounces
•Displays inches with fractions or millimeters
•Large easy to read display
•Resolution 0.05mm, 0.001-inch, 1/64-inch
•Stable magnetic base for easy positioning
•Lays flat for fence-to-router bit positioning
Product description • Measuring range 0 to 6.25 inches • Accurate to .001 inch per 6 inches • Large LCD display • Resolution to 0.0005 inches • Solid and substantial cast base (2 inches x 1.25 inches x 4 inches) with lapped bottom • Hardened stainless steel vertical beam • Hardened steel scribe .25 inches wide with 2 inch reach • Readout the quickly converts between inches (.001") , and metric (.01 mm) • Zero function at any depth • Power saving that shuts off after 5 minutes • Battery: 3 volt CR2032 with approximate life of 1 year
Necygoo Digital Depth Gauge 0-80mm 0-3.14in Digital Height Gauge with Magnet Based Locking Screw ABS INC Function MM inch Fraction Depth Height Measure for Woodwork Table Saw Etc
Magnetic stand is used for hand routers and routers tables. Suitable for horizontal and vertical measuring. It includes a rule depth gauge with locking screw to set the height of router cutters and saw blades accurately. It also has are movable pin to measure hole depths up to 50.8mm (2").
Horizontal and vertical measurement
For hand routers and routers tables
60mm wide aperture/jaw
Steel rule dual metric & imperial scale with locking screw
Self-standing for setting cutter depth on routers tables and low profile for back fence adjustment
Height Measuring Range: 80mm; 3 1/8 inch
Depth Measuring Range: 50mm; 2 inch
Resolution: 0.05mm / 0.002 inch
Accuracy: 0.10mm / 0.004 inch (<100mm)
Repeatability: 0.05mm / 0.002 inch
Max Measuring Speed: 1.5m/s, 60in/s
Power Supply: 1 x 3V CR2032 Battery (NOT Included)
1 x Digital Depth Gauge
1 x 3V CR2032 Battery
1 x Removable Pin
The Multi-Max is 5 Measuring gauges in one handy tool. It contains: Drill Point Gauge, Chisel Angle Gauge, Depth Gauge, Router Bit Gauge and a Height Gauge. Rule has both Imperial and Metric markings. Maximum height/depth measured is 3 inches.
iGaging 35-780 AccuMarking 3 in 1 Tool Digital Wheel Marking Gauge with Depth Gauge and Height Gauge
Marking gauge, height gauge and depth gauge all in one tool! our digital 3-in-1 marking gauge does everything a traditional marking gauge does and more. As a digital gauge, it does it all with an accuracy of 1/1000th of an inch. Features: measuring range: 0-6"; accuracy: 0.001"; repeatability: 0.0005 inch inch/metric/fractional display and conversion Super high precision hardened alloy marking wheel IP54 humidity & dust resistant Spare battery included.